PART II. One of the biggest engineering companies in Brunei is looking for qualified and experienced candidates for below categories:
11. Welding inspectors
The Inspector for welding shall be qualified as follows:
Experience: 10 years in Oil and Gas or related Industry with 5 years of which as Welding Inspector.
Qualifications
1. CSWIP - Senior Inspector 3.2
or
AWS - Certified Welding Inspector and CSWIP or PCN LII or ASNT LII in Radiographic Interpretation (Ferritic Steel)
or
CWB LII - Canadian Welding Bureau (AWS Equivalent ) and CSWIP or PCN LII or ASNT LII in Radiographic Interpretation (Ferric Steel or Equivalent).
Background Requirement
Knowledge in Inspection Methods/Techniques.
QA/QC Principles and Standards.
Knowledge in Quality Management System ISO 9000.
12. Blast/Paint or Coating Inspectors
The Inspector shall be certified with NACE level 2 (National Association of Corrosion Engineers) or ERS Senior Paint Inspector Level II or equivalent as a minimum and shall have at least five (5) years experience in painting/coating inspection and in general five (5) years experience in coating application work which includes knowledge of surface preparations, paintings, protective coatings and wrapping.
The inspector is responsible for quality control and as such he shall have no direct responsibilities for production although he will work closely with the production team.
The Coating inspector shall be responsible for all protective coating HSE aspects. He will be allowed to act as Safety Officer only for the protective coating application team.He shall co-ordinate with the COMPANY's Health Safety and Environment (HSE) Division on all protective coating safety matters.
He shall be able to communicate and write fluently in English.
13. Supervisors
The Supervisor will:
- Be skilled in the fabrication and erection of pipework, the general maintenance of process and power plant. The setting up and levelling of equipment and the aligning of rotating equipment;
- Be capable of interpreting engineering drawings and have knowledge of industrial safety;
- Be fluent in the English language (both spoken and written);
- Be capable of supervising the artisans and performing any administrative work. Such activities may include but will not be limited to obtaining and renewing work permits,(e.g. Clearance Certificates, Fire Permits etc.), submitting daily time sheets, input required data for the COMPANY computerized engineering administration systems;
14. Scaffold Supervisors
- Scaffolding supervisors shall have not less than ten (10) years relevant experience in the scaffolding industry. He shall hold an advanced C.I.T.B or E.I.T.B. Certificate of training.
- He shall be responsible to the CONTRACT MANAGER for supervision, co-ordination, and carrying out of scaffolding in connection with the WORK and shall be responsible for the workmanship, productivity, conduct and safety of the personnel. The Scaffolding supervisor shall be responsible for all aspects of design, erection and in-service maintenance and inspection of the scaffolding.
15. Electrical Field Engineers
The Electrical Field Engineer shall posses a BSc (or equivalent) in Electrical Engineering and shall have eight (8) to ten (10) years experience in design/construction/commissioning/ maintenance of H.V and L.V distribution systems including protection systems and explosion proof equipment. He must be able to speak, read and write good English (College level).
16. Instrumentation Field Engineers
The Instrumentation field engineer shall possess an HND or equivalent and shall have eight (8) to ten (10) years experience in new construction and commissioning of Instrumentation works. He must be able to speak, read and write good English (College level).
17. Electrical Supervisors:
The supervisor shall possess an HND or equivalent and shall have eight (8) to ten (10) years experience in new construction and commissioning H.V/L.V distribution systems including protection systems and explosion proof equipment. He must be able to speak, read and write good English (College level)
18. Electrical Technicians:
Each technician shall have passed the C and G 803 parts I and II or equivalent and shall have five (5) to seven (7) years experience in wiring of H.V/L.V control systems, installation of protection relays and CT‟s and explosion proof equipment. He must at least speak, read and write reasonably good English (upper secondary school level).
19. Skilled Electricians:
Skilled Electricians shall have completed trade apprenticeship or trade school training to C and G 823 or equivalent level. They must be skilled and experienced in the use of all electricians‟ hand tools and in the use of measuring and testing equipment. They must have at least 5 years on the job experience of which two (2) years shall preferably in the oil and gas industry. . He must at least speak, read and write reasonably good English (lower secondary school level).
20. Stationary Equipment Technicians
Stationary Equipment Technician will:
- be skilled on the opening up, closing, removal and installation of stationary equipment such as vessel, columns, heat exchangers, filters, non-return valve, valves, sight glasses, safety/relief valves, control valves including repacking and lapping of various valves;
- be familiar with spading and de-spading of pipeline system and have basic knowledge of hydraulic system;
- be familiar with piping work such as flange sizes, stud-bolts, pressure setting and gasket materials;
- be capable of using tools such as torque wrenches and hydraulic bolt tensioning equipment;
- be fluent in spoken and written English.
- have industrial working experience in the process industry on similar work for at least four years;
- have BTEC or City and Guild Certificate in Mechanical Engineering (desirable but not essential).
- A minimum of 3 personnel are required to be certified in the use of Breathing Apparatus (BA).
Interested applicants are invited to submit detailed resume (CV) stating educational and experience certificates in English not latest by January 19, 2012 to the following e-mail address: sahid@totaldata.co.id in MS Word not more than 300kb.
Please write "Your position -Brunei" on your email subject and application title.
Application with PDF or other format and exceeding more than 300KB will not be considered.
We are sorry, only shortlist candidates will be notified.
For more info's, please call us or click http://www.totaldata.co.id/jobsite_brunei.htm
PT. Totaldata Persada
Jln. Raya Jatikramat No. 8 Jatimakmur Pondok Gede Bekasi 17421
Telp. 021-8477689, 021-84994728. Attn.: Ms.Silvy.
40000+ members and counting.
No Spam. No Ads. No Bull. Just plain job posts.
Join us, send a blank e-mail to: vacancy-subscribe@yahoogroups.com
For jobs in India, send e-mail to: vacancy-india-subscribe@yahoogroups.com
===================
No comments:
Post a Comment