[vacancy] Various Engineering Vacancy - Brunei Based. PART III.

 

PART III. One of the biggest engineering companies in Brunei is looking for qualified and experienced candidates for below categories:

 

21.  Control Valve Technicians

Control Valve Technician will:

1. have experience - at least ten (10) years, in the overhaul, setting and testing of all types of control valves, including but not limited to FISHER, MASONEILAN AND BETTIS control valves and actuators. He must have relevant experience and ability in the testing procedures, stroke adjustment and repair;
2. have BTEC or City and Guild Certificate in Mechanical Engineering (desirable but not
3. have industrial work experience on relevant types of control valves in overhaul and testing for a minimum of 4 years;
4. be fluent in spoken and written English;
5. preferably be capable of working with spare parts and maintenance history system;
6. be capable of motivating and directing small teams of 2-4 fitter mechanics;

22.  Safety Relief Valve Technicians

Safety Relief Valve Technician will:

1. be experienced - at least ten (10) years, in the overhaul, setting and testing of all types of Safety Relief Valves, including but not limited to CROSBY, FUKUI, DRESSER, ANDERSON & GREENWOOD. He must have relevant experience and ability in repair and testing of Safety Relief Valves. He should be capable of working with inspectors and maintaining simple repair records systems. He should understand the principle of operation of Safety Relief Valves;
2. have BTEC or City and Guild Certificate in Mechanical Engineering (desirable but not essential);
3. have industrial work experience on relevant types of safety relief valves in overhaul and testing for a minimum of 4 years;
4. be fluent in spoken and written English;
5. preferably be capable of handling records systems;
6. be capable of motivating and directing small teams of 2-4 fitter mechanics.

23.  Rotating Equipment Technicians

Rotating Equipment Technician will:

1. have obtained National Certificate (BTEC) or equivalent City and Guilds Certificate in Mechanical Engineering Practices;
2. be capable of overhauling rotating equipment such as centrifugal and reciprocating pumps, steam turbines, gear boxes and reciprocating compressors (including their piping system and structural support);
3. be able to interpret drawings and manuals and have a good understanding of the functioning of each part of the equipment.
4. be able to diagnose and correct intricate problems in turbine/compressor lube-, control- and seal oil systems and other hydraulic systems.
5. be capable of selecting and using the correct tools, alignment equipment and materials;
6. have good knowledge of industrial safety procedures;  
7. have a minimum of six (6) years practical experience in overhauling rotating equipment;
8. be able to communicate in spoken and written English.

24.  Riggers

Riggers will:

1. have the full range of skills applicable to their trade in the Oil and Gas Industry including, but not limited to being skilled in the sizing and fixing of slings, chain blocks etc., giving clear control instructions to crane operators and in the erection of steelwork
2. have a minimum of four (4) years suitable practical experience in oil refinery, gas, power or petro-chemical plant
3. have a working knowledge of the applicable standards and the use and handling of:

- wire ropes/slings to BS1290, BS3317 and BS3481

- pulley blocks to BS3243

- shackles to BS3032

- chain hoists to BS4898

25.  Mechanical Fitters

Mechanical Fitters will:

1. have the full range of skills applicable to their trade in the Oil and Gas Industry including, but not limited to, being skilled in the repair and maintenance of refinery process and power plant, pumps, compressors, steam turbines, fans, hydraulic equipment and system etc., in the overhaul of valves (including safety relief and control valves) and of other mechanical equipment e.g. exchangers, columns, vessels and tanks, and in the alignment of running equipment;
2. have a minimum of five (5) years suitable practical experience in oil refinery, gas, power or petro-chemical plant;
3. have a working knowledge of the English language.

26.  Machinists

Machinists will:

1. be able to work from drawings to produce parts, or make repairs to stationary and rotating equipment to a high level of accuracy and quality;
2. be able to set up and operate any machine tool, including lathes, boring, milling, lapping, grinding, shaping and balancing machines;  
3. have a minimum of ten (10) years experience as a Machinist;
4. have a sound knowledge and a familiarity with engineering drawings and sketches, as well as being fully conversant in English.

27.  Insulation Supervisors

1. The Insulation Supervisor shall have received education up to Form 5 level and shall be able to speak, read and write in the English language. He shall have a proven record as a supervisor in Thermal and Cryogenic Insulation, the application of vapour barriers and Glass fibre Reinforced Epoxy, the mixing of chemicals for the formulation of Polyurethane Foam and the maintenance/installation of refractory bricks or mortar work and sheet metal work for at least Five (5) years. He shall be able to demonstrate his competence by passing a competence or trade test if so required by the COMPANY.
2. He should have knowledge of the latest revision of the CINI guideline and know how to apply the guideline for hot and cold insulation.
3. He shall be able to take measurements and be familiar with sheet metal equipment and make sketches for the fabrication of sheet metal work as well as being capable of installing the finished work
4. He must be capable of exercising firm control over his subordinates and must meet the stringent standards (QA/QC) required for insulation work.
5. He shall be well experienced in the operation and general maintenance of mechanical agitators and foaming machines, and in quality control procedures.

28.  Insulators/Fabricators

1. The Insulators/Fabricators shall have received education up to Form 3 level and be able to speak, read and write in the English/Malay languages.
2. They shall have received a formal training or apprenticeship in their craft and shall be skilled in Sheet Metal Fabrication, the installation and repair of Thermal and Cryogenic Insulation, the application of vapour barriers and Glass fibre Reinforced Epoxy, the mixing of chemicals for the formulation of Polyurethane Foam and the maintenance/installation of refractory bricks or mortar work.
3. They shall be skilled in the installation/repair of sheet metal work. They shall be thoroughly familiar with all other work related to Thermal and Cryogenic Insulation and refractory/bricks repair work.
4. They shall have received a formal training or apprenticeship in the sheet metal work craft, from a recognised Trade School. They shall have at least five (5) years experience in the formation of various types of Aluminium and sheet metal or S.S. boxes, sleeves, elbows, "T" junctions cladding for pipe line and equipment. They shall be able to take accurate site measurements for the fabrication of various types of forms and/or sleeves.

29.  Diesel Engine Operators

Diesel Engine Technician will:

1. Have BTEC or City & Guild Certificate in Mechanical Engineering (desirable but not essential).
2. Be able to service and overhaul diesel engines such as compressors, pumps, generators, etc.
3. Be capable of using the correct tools and equipment.
4. Have good knowledge of industrial safety procedures.
5. Have a minimum of four (4) years practical experience.
6. Be able to communicate in spoken and written English.

30.  Painters

Fully experienced in painting preparation and protection of steel surfaces techniques using hand and mechanical EQUIPMENT by either brush, or rollers and painting to the respective standard operations contained in COMPANY'S Painting/Coating Application guide and Specifications ES-48.00 and Module 32, and be familiar with the safety requirements of painting.

Interested applicants are invited to submit detailed resume (CV) stating educational and experience certificates in English not latest by January 19, 2012 to the following e-mail address: sahid@totaldata.co.id in MS Word not more than 300kb.

 

Please write "Your position -Brunei" on your email subject and application title.

 

Application with PDF or other format and exceeding more than 300KB will not be considered.

 

We are sorry, only shortlist candidates will be notified.

 

For more info's, please call us or click http://www.totaldata.co.id/jobsite_brunei.htm 

 

PT. Totaldata Persada

Jln. Raya Jatikramat No. 8 Jatimakmur Pondok Gede Bekasi 17421

Telp. 021-8477689, 021-84994728. Attn.: Ms.Silvy.

 

Thanks Mr. Admin.

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

• New Members 10

Visit Your Group

____
40000+ members and counting.
No Spam. No Ads. No Bull. Just plain job posts.
Join us, send a blank e-mail to: vacancy-subscribe@yahoogroups.com
For jobs in India, send e-mail to: vacancy-india-subscribe@yahoogroups.com

===================

MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

.

__,_._,___