We have urgently need Staffs for our client in the Oil & Gas Refinery Industry in search for potential candidates as below:
1. ELECTRICAL ENGINEER
Duration : Long Term
Closing Date Submit CV : 18.02.2013
Purpose
- To plan, supervise and coordinate all Maintenance activities for Company Plant Electrical equipment, to ensure availability and reliability.
Main Accountabilities
- To plan and carry out Predictive/Reliability Centered Maintenance (RCM) programs like Dissolved gas analysis, Partial Discharge test, etc for condition monitoring of Electrical equipment thereby ensure improved machine availability and power system reliability.
- To comply with Company Health Safety and Environment Management System (HSE - MS)and also promote awareness among the staff
- To conduct Internal Safety audit of the Installations in the assigned plants including camps with regards to Electrical equipment and develop action plan for area maintenance engineers to take up corrective measures.
- To review the periodic & shutdown work plans and integrate activities with other sections for their execution.
- Responsible for technological up-gradation of obsolete equipment, preparation & execution of Plant Change Requests PGRs) for modification in existing facilities.
- To compile/provide input for preparation of division/department Capital, Operating and 5 year Plan budgets and monitor/control expenditure.
- To carry out detailed engineering, prepare scope of work, technical evaluation and execution for Capital, Extra Ordinary Maintenance (ECM) and Major Maintenance (MM) activities.
- To review the existing maintenance practices and support implementation of innovative & modern methodologies for enhanced productivity leading to improvement in MTBF. To ensure optimum utilization of the CMMS (MAXIMO) system for maintaining job history and data quality so as to ensure retrieval of quality information.
- To perform High Voltage switching activities.
- To prepare method statements for critical jobs, verify electrical procedures and instructions, plus scope of work for contract jobs and service work orders.
- To support CD for technical evaluation of bids and inspection of materials on receipt.
- To ensure development & implementation of Competency Based Training & Development programs, through use of Development Plans and UAE Nationalization directives.
Minimum Requirements:
- B.Sc. in Electrical Engineering
- Minimum 10 years experience in Oil & Gas Industry.
- Good knowledge of English language.
- Knowledge of Maximo
2. ELECTRICAL SUPERVISOR
Duration : Long Term
Closing Date Submit CV : 18.02.2013
Purpose
To supervise and participate in preventive, corrective and troubleshooting maintenance and testing of all High and Low Voltage plant electrical equipment and shutdown activities.
Main Accountabilities
- To supervise the electrical technicians and contractor craftsmen to ensure that the maintenance activities are performed to comply with Company's HSE policies and procedures.
- To fully utilize the Maximo System to prepare job plans ( Two weeks rolling plan ) including material and manpower, initiate IRs, execute preventive maintenance and breakdowns ( troubleshooting and repairs ) - work orders and input failure reports input to Maximo.
- Accountable for production loss and on call to attend breakdown, identify faults, repair and return equipment to normal operation.
- To prepare PTW based on the periodic PM job plans, allocate work and conduct toolbox meetings to ensure understanding of the daily work tasks.
- To train and develop the assigned staff with emphasis to UAE Nationals.
- To issue specific jobs' method statements in coordination with Electrical Section Head & Engineer, initiate near miss reports and conduct toolbox meetings for critical jobs and activities.
- To issue scope of work for contracted jobs and service work orders in coordination with Electrical Section Head & Engineer, and assist preparation of EOM, MM & Capital Budgets, Plant PCR's and shutdown planning and implementation activities.
- To ensure availability of Good & safe to use proper tools, spares, consumables and correct use of various types of electrical equipment and PPE as specified in daily PTW & Method statements .
- To ensure that the drawing and documents are up to date in his assigned area and the maintenance sheets are completed and filed properly.
- To comply with Company Health, Safety and Environment Management System (HSE-MS) and also promote awareness of its use among the staff.
- To perform overhauling of Motors, MOVs, test and calibration of test equipment.
- To develop and recommend innovative systems / procedures that contributes to improve the reliability, availability and integrity of the plant.
- To implement, in consultation with Electrical Section Head / Electrical Engineer, Planned shutdowns, utilize available manpower & issue required materials.
- To coordinate with other Engineering sections and Operations Department to carry out daily maintenance activities, plant change projects and modifications.
Minimum Requirements
- Secondary technical certificate followed by 3 years formal training leading to a diploma in Electrical Engineering
- Minimum 10 years experience in Oil & Gas Industry.
- Good knowledge of English language.
- Knowledge of Maximo
3. INSTRUMENT & CONTROL ENGINEER
Duration : Long Term
Closing Date Submit CV : 19.02.2013
Purpose
- To plan, lead and direct the maintenance activities of a wide range of Control Systems in the assigned area, and coordinate these activities with operations and other maintenance sections.
Main Accountabilities
- To coordinate the testing, repairing, calibration and troubleshooting of the Instrumentation Control systems in Company Plant.
- To provide field supervision over the execution of critical maintenance activities of the equipment and ensure that the problems are resolved with minimum down time.
- To comply with Company Health, Safety and Environment Management System (HSE-MS).
- To evaluate the manpower requirement for daily preventive, break down and shutdown maintenance prepare the job schedule.
- To monitor the work order status for obstacles, and to re-schedule the task if required.
- To monitor and control spares inventory in coordination with purchasing division by analyzing the stock level end rate of consumption.
- To ensure optimum utilization of the MAXIMO system for maintaining job history.
- To liaise with Mechanical and Electrical sections end establish a seamless integration between operation and maintenance teams.
- To prepare end review various maintenance performance reports such as Preliminary Failure and Root Cause Analysis Reports.
- To compile/provide input for preparation of division/department Capital and Operating budgets and monitor annual expenditure budgets.
- To ensure implementation of Competency Based Training & Development programs, through use of Development Plans and UAE Nationalization directives.
Minimum Requirements
- B.Sc. in Instrument and Control
- With minimum of 5 years experience as system engineer in oil and gas industry.
- With relevant experience in DCS (Siemens)
- Good knowledge of English language
4. INSTRUMENT & CONTROL SUPERVISOR
Duration : Long Term
Closing Date Submit CV : 19.02.2013
Purpose
- To supervise and participate in preventive, corrective and troubleshooting maintenance, and testing of all plant instrument & control systems equipment.
Main Accountabilities
- To supervise, coordinate and participate in the preventive, corrective and troubleshooting maintenance activities of the plant equipment at the assigned location.
- To participate in the planning, scheduling and execution of shutdown and major overhaul maintenance activities.
- To assist the section head in establishing priorities, making improvements on work methods and to participate in evaluating modification proposals, failure analysis and unscheduled shutdowns.
- To comply with Company Health, Safety and Environment Management System (HSE-MS) and also promote awareness of its use among his staff.
- To prepare the list of spares, tools and other material required for the maintenance jobs and issue the Purchase/Material requisitions for the Section Head approval.
- To inspect and confirm that the specifications are in line with the requirement of the received direct charge' and 'stock Materials'.
- To conduct Toolbox meetings with subordinates for discussing safety and methods of completing job tasks.
- To evaluate equipment performance problems and to suggest modification / available new technology to reduce overall maintenance cost.
- To direct and participate in performing maintenance of instrument and control systems and advise on the maintenance schedule based on the analysis.
- To implement equipment manufacturer service bulletin recommendations.
- To interface and coordinate with other sections in sorting out equipment problems and maintenance activities.
- To participate in budget preparation and cost control.
- To monitor and ensure that the shutdown maintenance jobs are carried out within the scheduled time frame.
- To update the equipment Data, History and Maintenance records in 'MAXIMO' system.
- To organize the safe consignment of the parts removed from the main equipment for refurbishment and to inspect the refurbished material.
- To provide On Job Training to meet Competency Based Training programs for UAE Nationalization.
Minimum Requirements
- Advanced vocational training (2 years) in Electronic or Instrumentation with 8-10 years of professional experience or B.Sc. in Electronics and in Electrical Engineering plus 7-10 years experience
- With relevant experience in DCS, Maximo knowledge is desired.
- Good knowledge of English language
5. MECHANICAL SUPERVISOR
Duration : Long Term
Closing Date Submit CV : 23.02.2013
Purpose
- To supervise and participate in preventive, corrective and troubleshooting maintenance, and testing of all plant mechanical equipment.
Main Accountabilities
- To supervise, coordinate and participate in the preventive, corrective and troubleshooting maintenance activities of the plant equipment at the assigned location.
- To participate in the planning, scheduling and execution of shutdown and major overhaul maintenance activities.
- To assist the section head in establishing priorities, making improvements on work methods and to participate in evaluating modification proposals, failure analysis and unscheduled shutdowns.
- To comply with Company Health, Safety and Environment Management System (HSE-MS) and also promote awareness of its use among his staff.
- To prepare the list of spares, tools and other material required for the maintenance jobs and issue the Purchase/Material requisitions for the Section Head approval.
- To inspect and confirm that the specifications are inline with the requirement of the received direct charge' and 'stock Materials'.
- To conduct Toolbox meetings with subordinates for discussing safety and methods of completing job tasks.
- To evaluate equipment performance problems and to suggest modification / available new technology to reduce overall maintenance cost.
- To direct and participate in performing Condition Monitoring of Rotating equipment and advice on the maintenance schedule based on the analysis.
- To implement equipment manufacturer service bulletin and TILS
- To interface and coordinate with other sections in sorting out equipment problems and maintenance activities.
- To participate in budget preparation and cost control .
- To monitor and ensure that the shutdown maintenance jobs are carried out within the scheduled time frame.
- To update the equipment Data, History and Maintenance records in 'MAXIMO' system.
- To organize the safe consignment of the parts removed from the main equipment for refurbishment and to inspect the refurbished material.
- To provide On Job Training to meet Competency Based Training programs for UAE Nationalization.
Minimum Requirements
- Completion of Technical Secondary educations followed by 3 years Higher Diploma in Mechanical Engineering.
- At least 8 years experience in the installation, repair, testing and maintenance of a wide range of mechanical equipment, preferably in an oil and gas industry
- Good knowledge of English language
6. PROCESS ENGINEER
Duration : Long Term
Closing Date Submit CV : 19.02.2013
Purpose
- To ensure smooth running of the plant by performing a variety of process engineering duties such as preparing studies, daily/monthly reports, testing & implementing changes in plant operation, and trouble shooting of operating problems.
Main Accountabilities
- To prepare daily performance summaries to monitor plant by studying laboratory test reports, standard log sheets and other daily operating activity reports, and highlights abnormalities and suggests corrective actions to supervisor.
- To collect monthly plant production and operating data, evaluates unit efficiencies by relating chemicals and energy consumption and prepares reports with comments.
- To study required alterations of technical nature, in order to meet variations in production plans and/or a varying feedstock.
- To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
- To participate in the identification of possible solutions in process problem areas, which will include analyzing operating reports and discussing problem items with the departments concerned.
- To participate in HAZOP and HAZID studies pertaining to proposed modifications.
- To compile/provide input for preparation of division/department Capital, Operating and 5 Year Plan budgets, and monitor/control expenditure.
- To develop computer programs for process plants monitoring and yield prediction and apply computer simulation models and other advanced techniques to achieve optimum plant performance.
- To provide technical services and assistance to other sections such as Instrumentation, Maintenance, Inspection and Material as required.
- To review and provide comments and feedback on drawings and P&ID'S.
- To provide On Job Training to meet Competency Based Training programs for UAE Nationalization.
Minimum Requirements
- Degree in Chemical Engineering or equivalent
- 8-10 years process engineering experience in oil and gas industry/plants with at least 3 years experience in either operational/technical services in an Operating plant
- Must be fluent in English
7. ROTATING EQUIPMENT SUPERVISOR
Duration : Long Term
Closing Date Submit CV : 23.02.2013
Purpose
- To supervise and participate in preventive, corrective and troubleshooting maintenance and testing of plant rotating equipment in the assigned areas.
Main Accountabilities
- To supervise, coordinate and participate in the preventive, corrective and troubleshooting maintenance activities of the plant equipment at the assigned location.
- To participate in the planning, scheduling and execution of shutdown and major overhaul maintenance activities.
- To assist the Section Head in establishing priorities, making improvements on work methods and to participate in evaluating modification proposals, failure analysis and unscheduled shutdowns.
- To comply with Company Health, Safety and Environment Management Systems (HSE-MS) and also promote awareness of its use among its staff.
- To prepare the list of spares, tools and other materials required for the maintenance jobs and issue the Purchase/Material requisitions for the Section Head approval.
- To inspect and confirm that the specifications are inline with the requirement of the received `direct charge' and `stock materials'/
- To conduct Toolbox meetings with subordinates for discussing safety and methods of completing job tasks.
- To evaluate equipment performance problems and to suggest modification / available new technology to reduce overall maintenance cost.
- To direct and participate in performing Condition Monitoring of Rotating equipment and advice on the maintenance schedule based on the analysis.
- To implement equipment manufacturer service bulletin and TILS recommendations.
- To interface and coordinate with other sections in sorting out equipment problems and maintenance activities.
- To participate in budget preparation and cost control.
- To monitor and ensure that the shutdown maintenance jobs are carried out within the scheduled time frame.
- To update the equipment data, history and maintenance records in `Maximo' system.
- To organize the safe consignment of the parts removed from the main equipment for refurbishment and to inspect the refurbished material
- To train and develop the assigned staff with emphasis to UAE Nationals.
Minimum Requirements
- Degree in Mechanical Engineering
- With 10 years experience preferably in Oil and Gas industries
- Fluent in English, technical reports and maintenance experience similar Rot. Eqpt. generations
8. SENIOR ELECTRICAL ENGINEER
Duration : Long Term
Closing Date Submit CV : 18.02.2013
Purpose
- To provide expert engineering technical support to ensure that electrical equipment and distribution network of Company Plants, are operated and maintained in line with best world-class practices and standards.
Main Accountabilities
- To troubleshoot problems, identify reasons and recommend remedial action to ensure that maintenance services are provided safely and efficiently.
- To diagnose, analyze and carry out cause failure analysis, highlight reasons for equipment failure and advise on remedial measures to avoid failures. Also to study and carry out residual life assessment of critical electrical equipment and suggest corrective action to be initiated by respective area engineers.
- To enforce the implementation of Company Health Safety and Environment Management System (HSE MS) and also promote awareness of its use among all staff.
- To conduct site engineering studies to determine the feasibility of introducing modification to increase reliability and efficiency of plant.
- To prepare/review and update maintenance procedures for electrical equipment and suggest procedures to enhance equipment efficiency.
- To compile/provide input for preparation of division/department Capital and Operating budgets and monitor annual expenditure budgets.
- To develop scope of work for Major overhauls of electrical equipment & work service orders, coordinate implementation with other Sections
- To ensure implementation of competency based Training & Development programs, through use of Personal Development Plans (POPs) and OAE Nationalization directives
- To develop and optimise Vendor, OEM, and Specialist contractor support and arrange specialist services.
- To co-ordinate with Subsidiary/GUP for any work on the intake 132 KV interconnectors and related switching activities.
Minimum Requirements
- B.E in Electrical Engineering
- Minimum 10 years experience in Electrical Engineering with Oil and Gas Industry.
- Good knowledge of English language
9. SENIOR INSTRUMENT & CONTROL ENGINEER
Duration : Long Term
Closing Date Submit CV : 19.02.2013
PURPOSE
- To provide expert technical engineering support to ensure and assume prime responsibility to maintain and continuously enhance the performance of DCS, Alarm Management and Real time information systems.
MAIN ACCOUNTABILITIES
- To compile/provide input for preparation of division/department Capital, EOM, MM and Operating budgets and monitor/ control expenditure against budget.
- To provide expert technical support and assume prime responsibility for maintaining the DCS system, including hardware and software.
- To coordinate with other divisions/departments and vendors for all ongoing projects.
- To identify new equipment and concepts for plant automation systems including DCS, Real time information systems, and other sub-systems.
- To develop and implement new application software modifications in DCS and Real Time information systems.
- To constantly review and evaluate the effectiveness of the DCS systems. Upgrade/modify the control systems to address the obsolescence, standardization and integrity issues
- To enforce the implementation of Company Health, Safety and Environment Management System (HSE-MS) and also promote awareness of its use among all division and department personnel.
- To carry out root cause analysis and investigation into system problems and failures. To coordinate with Vendors and Other departments to identify `bad actors' and develop solutions to improve the system performance and reliability.
- To review the DCS hardware spares inventory and coordinate supply with the materials department.
- To monitor the Performance of Alarm Management System (AMS) and continuously update the plant model parameters.
- To ensure implementation of competency based Training & Development programs, through use of Personal Development Plans (PDP's) and UAE Nationalization directives.
- To Assist and provide technical support to users in all Process automation systems such as SCADA, ESD, Fire &Gas and all interface systems to the DCS.
- To act as a software custodian of all plant control and electrical systems, as well as continuously updating and maintaining backups of the system.
Minimum Requirements
- Graduate Degree in Instrumentation / Electronics Engineering with minimum 10 yrs experience in the Instrumentation and Control field.
- Minimum 05 yrs Oil & Gas Industry experience in Instrumentation and Control project consultancy, knowledge about industry international standards and specifications. *
10. SENIOR MECHANICAL ENGINEER
Duration : Long Term
Closing Date Submit CV : 23.02.2013
Purpose
- To provide operation support related to activities like overhaul, revamp, up-rate, studies, troubleshooting & RCA related to rotating equipment at all plants.
- To provide engineering support to project divisions in bid preparation, tender technical evaluation & selection of rotating equipment.
Main Accountabilities
- To review capital spares inventory for rotating equipment ensuring that optimum levels are maintained and to order replacement of aged parts.
- To develop & update M & I policy & review of DGS related to rotating equipment.
- To develop annual & long-term (operating & capital) budget related to rotating equipment for all plants & to ensure effective utilization & control by preparing contract acquisition plan for subsequent years & five year business plan for capital purchase of the rotating equipment items
- To develop scope of work for long term service agreements with OEMs & non-OEM service providers for utilization of specialist services & refurbishment of capital insurance spares & to ensure that the quality of repairs / overhauls are in line with the agreed standards.
- To ensure consistent quality throughout refurbishment work and replacement orders by performing careful check on the quality procedures of OEM / service providers and adequate inspections.
- To assist plants in identifying solutions to the recurring chronic problems which require in depth investigation. Root Cause Failure Analysis & liaise with OEMs (if required) to ensure effective solutions.
- To coordinate studies related to feasibilities, life assessment, obsolescence, upgrades, future strategies & evaluate OEM recommendations related to new technologies to enhance reliability, availability, efficiency & performance of rotating equipment.
- To carry out the studies influencing the future of Gas Turbines require thorough & critical review.
- To provide technical support on rotating equipment to plants, projects & training departments / divisions and to support plant & project divisions in execution of various specialized upgrade/revamp projects.
- To support projects by preparing data sheets / specifications, finalize sizing, layout, estimate capacity & power requirement for rotating equipment & related systems. To evaluate technical offers from bidders, review technical query sheets, vendor documents & attend clarification meetings with project divisions on issues related to rotating equipment
- To review the execution strategies, design & specifications at minimum overall cost while being consistent with project requirements.
- Maintain a consistent approach in preparation of bid documents and evaluation of projects technical tenders to ensure consistency in all the new projects
Minimum Requirements
- B,Sc in Mechanical Engineering or equivalent qualification.
- 7 years experience in Oil & Gas
- Experience in Asset Life Cycle Management abd Asset Life Extension
- Has good experience in Aging and obsolescence management
- Experience in LCC analysis, cost benefit analysis and cost risk optimization
- Has good experience in design modification, maintenance and inspection
11. SENIOR ROTATING EQUIPMENT ENGINEER
Duration : Long Term
Closing Date Submit CV : 23.02.2013
Purpose
- To execute, coordinate and support the activities related to the overhaul, revamp, up-rate, troubleshooting and studies related to rotating equipment in all plants within Company
- To provide engineering to all project divisions at various stages of projects especially in tender technical evaluation and selection of rotating equipment for future projects
Main Accountabilities
- To develop the annual and long-term budget for operating and capital requirements of the rotating equipment machinery covering all Company plants and to execute activities related to such budget ensuring that effective utilization and control is implemented.
- To develop and update M & I policy and DGS related to rotating equipment.
- To develop scope of work for repair / overhaul of rotating equipment and evaluation of the bids technically, commercially and delivery terms.
- To develop long term service agreements with main equipment suppliers & established non-OEM service providers for utilization of specialist services and refurbishment of capital insurance spares.
- To ensure that the quality of repairs and overhauls by various manufacturers and non-OEM service providers are in line with the agreed standards.
- To assist plants in identifying solutions to the recurring chronic problems which require in depth investigation & liaise with Original Equipment Manufacturers (if required) to ensure effective solutions.
- To coordinate studies related to feasibilities, life assessment, obsolescence, upgrades, future strategies and appraise equipment manufacturers recommendation related to new technologies aiming to improve reliability, availability and performance of the rotating equipment with optimized operating cost.
- To provide technical advice on the rotating equipment to various operating, engineering, projects and training departments / divisions.
- To prepare data sheets / specifications, finalize sizing, layout, estimate capacity and power requirement for rotating equipment & systems involving rotating equipment,
- To prepare Request For Quotations (RFQs) and Purchase Requisitions, evaluate technical offers from bidders, technical query sheets and review vendor documents and attend clarification meetings in co-ordination with project divisions on issues related to rotating equipment
- To review capital spares inventory for rotating equipment ensuring that optimum levels are maintained and to order replacement as per 5-year business plan.
- To support planning engineer with preparation of Long Term Maintenance of Rotating equipment, effective history & record keeping of the rotating equipment and to utilize such records to plan proper replacement of aged parts.
- Prepare contract acquisition plan for subsequent years and five year business plan for capital purchase of the rotating equipment items
- To provide support to plant & project divisions in execution of various specialized upgrade/revamp projects.
Minimum Requirements
- B.Sc. Mechanical Engineering
- Minimum of 10-15 years experience, 7 years out of 15 worked as Senior position. Worked in Petrochemical refinery , Oil & gas experience
- Has good knowledge of troubleshooting & problem solving of Rotating equipments (Gas Turbines, Steam turbines, Compressors, Pumps)
- Good knowledge of English language
Documents MOST Required:
1. Color Photograph 4x6 = 10 pages, with white background
2. Application letter and Complete CV (MS. WORD FORMAT)
3. Degree Certificate & Transcript Certificate
4. KTP and Passport
5. Working Experience Letter
6. Training Certificate
RESUMES WITHOUT JOB DESCRIPTION AND POSITION APPLYING FOR WILL BE DISREGARDED
ONLY SHORTLISTED CANDIDATE will get THE NOTICE by email & phone call
INTERVIEW WILL BE HELD IN JAKARTA ON MARCH 2013 !!!
Please submit your CV to: admin1@milleniummudamandiri.com & mmm_jakarta@yahoo.com
PT Millenium Muda Mandiri
Menara Hijau, 11th Floor Suite #1102A
Jl. MT Haryono Kav. 33, Cawang
Jakarta 12770
Tel. 021 – 7987533
Website. www.milleniummudamandiri.com
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
____
40000+ members and counting.
No Spam. No Ads. No Bull. Just plain job posts.
Join us, send a blank e-mail to: vacancy-subscribe@yahoogroups.com
For jobs in India, send e-mail to: vacancy-india-subscribe@yahoogroups.com
===================
40000+ members and counting.
No Spam. No Ads. No Bull. Just plain job posts.
Join us, send a blank e-mail to: vacancy-subscribe@yahoogroups.com
For jobs in India, send e-mail to: vacancy-india-subscribe@yahoogroups.com
===================
.
__,_._,___
No comments:
Post a Comment