PT Mega Petro Synergy (MPS) is looking for some candidates for supporting our team in some client's project.
The position required is:
SUBSEA ENGINEER
Concentration:
- Subsea Mechanical Engineer
- Subsea Controls Engineer
- Subsea Systems Engineer
- Subsea Design Engineer
- Subsea Product Engineer
Role, Responsibilities & Competencies (but not limited):
- Well Intervention/ IWOCS/ Well Services/ Hydraulics/ Completion/ Subsea production Systems
- Planning for subsea systems operations, maintenance, and repair
- Organize, brief, and directly control assistance team for pulling the BOP stack
- Operate, maintain & repair the subsea BOP control system, i.e. surface BOP or multiplex electro-hydraulic control systems
- Maintain knowledge of drilling operations to assemble and disassemble
- Support operations involving subsea and surface support equipment
- Perform calculations
- Move heavy equipment
- Install subsea equipment during drilling operations
- Pre-plan all evolutions for most efficient, time effective operations
- Maintenance and Repair
- Install and maintain all components and parts
- Maintain and test all drilling or marine subsea and surface support equipment
- Troubleshoot all subsea and surface equipment and recommend corrective action
- Witness all pressure, latch-up and weight set tests on subsea safety and/ or completion equipment to ensure all evolutions are performed safely and timely
- Maintain internal and external preservation, of all subsea equipment
- Perform or witness measurements of subsea equipment
- Install and maintain the Riser
- Assist drill crews in maintaining crown mounted compensator
- Maintain and repair surface unit high pressure hydraulics
- Assist with repair and maintenance of electronic controls for the unit
- Troubleshoot/repair any equipment for the subsea stack and surface control units
- Perform all aspects of maintenance, repair, and upkeep on subsea/support systems
- Assist in mechanical auxiliary system repair as necessary
- Preventative maintenance and inspections on equipment for wear and leaks
- Overhaul equipment as necessary for proper operation
- highly specialized in MUX electronic control systems and regulation technology, including pneumatic and electrical systems
- have a Well Control certificate, Supervisor Level, Combined Surface and Subsea BOP Stack issued by an institution approved by IWCF
- skilled within fault finding and troubleshooting skills as well as being able to read and analyse drawings.
- possess great interpersonal skills and have the ability to communicate with people at all levels of the organisation. At the same time, you are direct and get to the point in a respectful manner and you know how to lead the way.
- demonstrable background with Subsea Engineering, both Structural and Pipelines, or possess flow equipment products, system background
- ensure Interface with the Programme Manager and Quality team for contract reporting, contractual subjects related to the EPCI contract, progress & schedule of the EPCI Contract, Cost & Commercial subjects.
- Core knowledge of the main engineering disciplines: Pipelines/Structural/Subsea.
Degree in relevant and recognised engineering discipline (chartered engineer or equivalent).
Significant.
• Operate, maintain & test hydraulic connectors. Maintain BOP handling equipment, testing equipment and wellhead equipment
- Operate and pressure test the BOP on the surface and on the seabed as required
- Maintain the Blow Out Preventer (BOP), Diverter, and associated subsea equipment in accordance with the Rig Maintenance System (RMS) guidelines
- Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment
- Direct the assembly, installation, and nippling down of the BOP and all well control equipment as required
- Ensure that the riser pipe system is serviced and tested as required. Operate and maintain the diverter system and the running and handling tool
- Assist in running/testing the wellhead, casing hangers and seal assemblies. Operate and maintain wellhead running/retrieval test tools
- Maintain accurate daily log sheets relevant to the subsea equipment. Maintain records of BOP & associated equipment tests
- Maintain records of certification and inspection of subsea equipment
- Maintain records of ton-miles on wire ropes. Slip and cut according to the agreed program
- Ensure that Supervisor is informed of any issues relating to the subsea equipment that may affect the safe and efficient running of operations
- Ensure that the permit to work system is in place and followed
- Assist in supplying information for maintenance and repair budget
Qualifications:
- Holding Degree of Bachelor Science or Engineer or any relevant background
- has engineering & construction management experience (planning, cost control, contracting), appropriate industrial experience overall with successful experience in subsea projects Hydraulics and fluid system maintenance and repair
- Has experience on deepwater & hydrill
- Knowledge of BOP's and control systems; riser tensioners and CMC functions; all wellhead equipment and running tools
- Troubleshooting and problem resolution skills
- Good safety record from past operations
- Effective communication skills (written & oral)
- Completion of all training requirements for Subsea Engineer
- Computer skills in information systems
Forward comprehensive CV / resume via email to:
asa@mps-eng.com.sg
application@mps-eng.com.sg
beny@jobsmigas.com
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
beasiswa dalam dan luar negri
https://www.facebook.com/BerburuBeasiswa
============================================================
Milis lainnya:
Manajemen-Industri-subscribe@yahoogroups.com ==> Manajemen Industri
Free-English-Course-subscribe@yahoogroups.com ==> Kursus Bahasa Inggris
PONSEL-INDONESIA-subscribe@yahoogroups.com ==> Telpon selular
HRD-POWER-subscribe@yahoogroups.com ==> Milis HRD
Indo-Job-subscribe@yahoogroups.com ==> Lowongan kerja dalam dan luar negeri
Bisnis-Karir-subscribe@yahoogroups.com ==> Pembinaan bisnis dan karir
Training non profit komputer dan teknologi:
http://tech.groups.yahoo.com/group/KOMPUTER-TEKNOLOGI/
Training non profit manajemen produksi/operasi/supply chain/logistik:
http://finance.groups.yahoo.com/group/APICS-ID/
No comments:
Post a Comment